DTH Rock Drilling DTH Bits -DHD, SD, Mission, Ql, Mach, Br, Numa

• Customization: Available
• Customized: Customized
• Standard: ISO9001:2015
• Model NO.: DHD, Cop, SD, Mission, QL, Mach, Br, Numa
• Length: 60mm
• Type: Drilling Machine
• Material: Alloy Steel
• Usage: Well Drilling
• Mining Object: Petroleum Drilling and Production Equipment
• Bit Face: Spherical,Concave,Flat
• Application: Water Well,Mining Drilling
• Painting: Yellow, Blue, as Customer Needed
• Marketing Type: Hot Products 2023
• Transport Package: Wooden Case or Carton
• Specification: DHD350, MISSION50, SD5, QL50
• Trademark: Teamwhole
• Origin: Hunan, China
• HS Code: 820719
• Production Capacity: 8000PCS a Month

Product Description

 General Introduction

1. DHD, COP, MISSION, QL, SD, and MACH shanks.
2. Flat, concave, convex, drop center.
3. Spherical, ballistic, semi-ballistic.
4. Application range: All kinds of rock formation.
5. Flat, concave, convex bit face.
6. Spherical, ballistic buttons.

Features:
1. Reliable quality, long service life, rare abnormal breakage during service life.
2. Good flushing effect to ensure high drilling rate
3. Strict quality warranty and compensation rules
4. Reasonable designs
5. High penetration.
 

Bit Face Shape Selection:

 1. Drop Center Bit

For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.

 2. Concave Face

 The all-around application bit face specifically for medium hard and homogeneous rock formations. Good hole deviation control and good flushing capacity.

 3. Convex Face

 For  high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.

  4. Flat Face

 This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.

 

 Raw Material

 

Steel:

first class special alloy steel with high strength, heat resistance and wearable

Carbide
The best tungsten carbides from China are commonly applied.
Tungsten carbide from European is also available.

 

Model	Bit diameter mm(inch)	Weight
TH79(3.5inch)	90mm-100mm(3 1/2-3 7 /8)	4-4.5
DHD3.5	90mm-105mm(3 1/2-4 1/8)	4.5-5.5
BR33	90mm-100mm(3 1/2-3 7 /8)	4-4.5
DHD340	105mm-138mm(4 1/10-5 2/5)	8-12
QL40	110mm-133mm(4 3/8-5 1/4)	10-12
DHD350	135mm-165mm(5 3/10-6 1/2)	15.2-18
MISSION50	138mm-165mm(5 2/5-6)	16-18
QL50	138mm-152mm(5 2/5-6)	16-18
SD5	138mm-152mm(5 2/5-6)	16-18
MAHC50TS398(20inch)	138mm-152mm(5 2/5-6)	16-18
DHD360	152mm-203mm(6-8)	24-33
MISSION60	152mm-203mm(6-8)	21-30
SD6	152mm-254mm(6-10)	24-50
QL60(COP64G)	152mm-203mm(6-8)	24-33
XL60	152mm-190mm(6-7 1/2)	22-27
DHD380	200mm-305mm(7 7/8-12)	47-82
SD8	200mm-305mm(7 7/8-12)	47-82
QL80	200mm-305mm(7 7/8-12)	48-84
TH220	240mm-350mm(9 2/5-13 7/10)	75-125
NUMA100	240mm-350mm(9 2/5-13 7/10)	75-125
SD10	240mm-350mm(9 2/5-13 7/10)	75-125
DHD112	310mm-444.5mm(12 1/5-17 1/2)	140-252
SD12	310mm-444.5mm(12 1/5-17 1/2)	142-254
NUMA120	310mm-444.5mm(12 1/5-17 1/2)	140-252
TH398(20inch)	500mm-550mm(19 3/5-21 3/5)	480-510
TH600(32inch)	800mm-1000mm(31 2/5-39 3/10)	680-984

 

 Package